Get in touch with us today

Commercial Electrical · Newmarket

Commercial Electrical Services in Newmarket

E-Tech Masters is an electrical contractor licensed by the Electrical Safety Authority (ESA #7012823), serving business owners, property managers and contractors across Newmarket. Commercial work here can include a storefront renovation on Main Street, a new tenant moving into a unit off Davis Drive, and equipment that needs its own circuit in an industrial unit.

Newmarket’s commercial buildings vary widely. Many older commercial properties have been updated more than once over the years, and newer plazas were built with a specific tenant in mind.

Why E-Tech Masters

Commercial Electrical Needs Across Newmarket

Newmarket’s commercial properties range widely. There are historic storefronts downtown, retail and service plazas along Yonge Street and Davis Drive, and offices and clinics near the hospital. Industrial and flex units sit in the business areas off Mulock Drive and Harry Walker Parkway.

Each type brings different electrical starting points. An older building may have circuits that were extended or changed by earlier tenants. A newer plaza unit may have been built for a layout the next tenant doesn’t need. A site visit to look at the existing setup is usually the first useful step.

Common property types

Commercial Electrical Work We Handle in Newmarket

Renovations of Existing Commercial Spaces

When a space is renovated, its electrical layout usually changes too. We handle rough-in wiring while walls and ceilings are open, new and relocated circuits, lighting changes and final connections. New work is tied into the building’s existing system.

Tenant Improvements and Fit-Outs

A new tenant rarely uses a space the way the last one did. Fit-out work follows the new floor plan: receptacles where counters and workstations will sit, dedicated circuits for equipment, and lighting for the new layout.

New Circuits and Equipment Connections

Commercial equipment often needs more than a standard receptacle. We review each piece of equipment’s electrical requirements, check them against what the existing system can support, then install the dedicated circuit or connection it needs.

Panels and Electrical Distribution

Adding loads can push an existing panel past what it can reasonably supply. We assess the current capacity first. Sometimes the existing panel and distribution can handle the work; sometimes changes or an upgrade are needed. The assessment decides that, not an assumption.

Commercial Lighting

Lighting usually changes during a renovation: fixtures moved to suit a new layout, outdated fixtures replaced, or more efficient lighting installed. We take care of the wiring, circuits and switching that go with those changes.

Working With Older Buildings in Newmarket

Some of Newmarket’s commercial buildings, particularly along historic Main Street, have been renovated many times. Their electrical systems can carry the marks of earlier changes. Before planning new work, we look at how the existing system is laid out and what it can support, so new circuits integrate properly rather than adding to a patchwork.

This matters most when a space changes use, for example a retail unit becoming a café or a clinic. Equipment, lighting and receptacle needs can shift significantly with a change like that.

Before new work, we review

How a Commercial Electrical Project Runs

1. Consultation

You tell us about the property, the planned use and any drawings or equipment lists. The consultation is free.

2. Site Review & Capacity Check

We look at the existing electrical setup and what the new work will add.

3. Scope & Plan

We define the electrical scope and how it fits with the rest of the project and other trades.

4. ESA Notification

As the licensed electrical contractor, we file the notification of work with the ESA before work starts. ESA requires this for almost all electrical work.

5. Installation

Rough-in, circuits, panel or distribution work, lighting and connections, sequenced with the rest of the job.

6. Inspection & Completion

Where ESA inspects the installation, we coordinate the inspection. Final connections and completion follow.

If the project changes the building’s electrical service, the local distribution utility is also involved, and we’ll explain what that means for your schedule. A renovation that changes the layout or use of a space may also need a building permit from the Town of Newmarket. That is a separate process from the ESA notification.

Who We Work With

Business Owners

Opening, expanding or renovating a location.

Property Managers & Landlords

Preparing units for new tenants.

General Contractors

Electrical contracting for renovation or fit-out projects.

More Electrical Services for Commercial Properties

Businesses near Newmarket also ask us about EV charging for staff and customer parking, and about backup power for operations that can’t afford to lose power. You can see the full scope of our commercial work on the Commercial Electrical Services page.

Commercial EV Charger Installation

EV charging electrical installation for commercial properties, planned around the property’s electrical system and charging requirements.

Backup Generator Installation in Newmarket

Backup generator electrical installation for businesses, planned around the loads that need backup power.

Serving Newmarket and Nearby Communities

We work on commercial properties throughout Newmarket and across York Region, including nearby Aurora and East Gwillimbury. For nearby projects, see our page on commercial electrical services in Richmond Hill. If your property is elsewhere in the GTA, contact us to confirm.

Newmarket Commercial Electrical FAQs

Do you serve businesses throughout Newmarket?

Yes. E-Tech Masters serves commercial customers across Newmarket and the wider GTA. We are a service-area business, so we come to your property.

Do commercial renovations in Newmarket need an ESA notification?

Almost all electrical work in Ontario requires a notification of work filed with the ESA before work starts. As the licensed contractor, E-Tech Masters files it for the work we do.

Do I also need a building permit from the Town?

That depends on the renovation. Changes to layout, structure or use can require a Town of Newmarket building permit, separate from the electrical notification. Your designer, contractor or the Town’s building department can confirm.

Can you work in an older building on Main Street?

Yes. We start by assessing the existing electrical setup, then plan new work so it integrates with what’s there.

My new equipment needs more power. Do I need a panel upgrade?

Not necessarily. We assess the existing panel and distribution first. Some projects fit within the current capacity; others need changes. The assessment tells us which.

Do you work with general contractors and property managers?

Yes. We plan the electrical scope around the overall project, site conditions and other trades.

How do I start?

Request a free consultation or call 416-832-8946. Share the address, the planned use, and any drawings or equipment details you have.

Planning Commercial Electrical Work in Newmarket?

Tell us about the space and what it needs to do. We’ll talk through the electrical scope, what the existing system can support, and the next steps. You can also email info@etechmasters.ca.

Chat with us on WhatsApp